Ethernet

About

Note

This is a work in progress project and this section is still missing. If you want to contribute, please see the Contributions Guide.

Examples

To get started with Ethernet, you can try:

LAN8720

/*
    This sketch shows the Ethernet event usage

*/

// Important to be defined BEFORE including ETH.h for ETH.begin() to work.
// Example RMII LAN8720 (Olimex, etc.)
#define ETH_PHY_TYPE        ETH_PHY_LAN8720
#define ETH_PHY_ADDR         0
#define ETH_PHY_MDC         23
#define ETH_PHY_MDIO        18
#define ETH_PHY_POWER       -1
#define ETH_CLK_MODE        ETH_CLOCK_GPIO0_IN

#include <ETH.h>

static bool eth_connected = false;

// WARNING: WiFiEvent is called from a separate FreeRTOS task (thread)!
void WiFiEvent(WiFiEvent_t event)
{
  switch (event) {
    case ARDUINO_EVENT_ETH_START:
      Serial.println("ETH Started");
      // The hostname must be set after the interface is started, but needs
      // to be set before DHCP, so set it from the event handler thread.
      ETH.setHostname("esp32-ethernet");
      break;
    case ARDUINO_EVENT_ETH_CONNECTED:
      Serial.println("ETH Connected");
      break;
    case ARDUINO_EVENT_ETH_GOT_IP:
      Serial.println("ETH Got IP");
      ETH.printInfo(Serial);
      eth_connected = true;
      break;
    case ARDUINO_EVENT_ETH_LOST_IP:
      Serial.println("ETH Lost IP");
      eth_connected = false;
      break;
    case ARDUINO_EVENT_ETH_DISCONNECTED:
      Serial.println("ETH Disconnected");
      eth_connected = false;
      break;
    case ARDUINO_EVENT_ETH_STOP:
      Serial.println("ETH Stopped");
      eth_connected = false;
      break;
    default:
      break;
  }
}

void testClient(const char * host, uint16_t port)
{
  Serial.print("\nconnecting to ");
  Serial.println(host);

  WiFiClient client;
  if (!client.connect(host, port)) {
    Serial.println("connection failed");
    return;
  }
  client.printf("GET / HTTP/1.1\r\nHost: %s\r\n\r\n", host);
  while (client.connected() && !client.available());
  while (client.available()) {
    Serial.write(client.read());
  }

  Serial.println("closing connection\n");
  client.stop();
}

void setup()
{
  Serial.begin(115200);
  WiFi.onEvent(WiFiEvent);  // Will call WiFiEvent() from another thread.
  ETH.begin();
}

void loop()
{
  if (eth_connected) {
    testClient("google.com", 80);
  }
  delay(10000);
}

TLK110

/*
    This sketch shows the Ethernet event usage

*/

#include <ETH.h>

#define ETH_TYPE            ETH_PHY_TLK110
#define ETH_ADDR            31
#define ETH_MDC_PIN         23
#define ETH_MDIO_PIN        18
#define ETH_POWER_PIN       17
#define ETH_CLK_MODE        ETH_CLOCK_GPIO0_IN

static bool eth_connected = false;

// WARNING: WiFiEvent is called from a separate FreeRTOS task (thread)!
void WiFiEvent(WiFiEvent_t event)
{
  switch (event) {
    case ARDUINO_EVENT_ETH_START:
      Serial.println("ETH Started");
      // The hostname must be set after the interface is started, but needs
      // to be set before DHCP, so set it from the event handler thread.
      ETH.setHostname("esp32-ethernet");
      break;
    case ARDUINO_EVENT_ETH_CONNECTED:
      Serial.println("ETH Connected");
      break;
    case ARDUINO_EVENT_ETH_GOT_IP:
      Serial.println("ETH Got IP");
      ETH.printInfo(Serial);
      eth_connected = true;
      break;
    case ARDUINO_EVENT_ETH_LOST_IP:
      Serial.println("ETH Lost IP");
      eth_connected = false;
      break;
    case ARDUINO_EVENT_ETH_DISCONNECTED:
      Serial.println("ETH Disconnected");
      eth_connected = false;
      break;
    case ARDUINO_EVENT_ETH_STOP:
      Serial.println("ETH Stopped");
      eth_connected = false;
      break;
    default:
      break;
  }
}

void testClient(const char * host, uint16_t port)
{
  Serial.print("\nconnecting to ");
  Serial.println(host);

  WiFiClient client;
  if (!client.connect(host, port)) {
    Serial.println("connection failed");
    return;
  }
  client.printf("GET / HTTP/1.1\r\nHost: %s\r\n\r\n", host);
  while (client.connected() && !client.available());
  while (client.available()) {
    Serial.write(client.read());
  }

  Serial.println("closing connection\n");
  client.stop();
}

void setup()
{
  Serial.begin(115200);
  WiFi.onEvent(WiFiEvent);  // Will call WiFiEvent() from another thread.
  ETH.begin(ETH_TYPE, ETH_ADDR, ETH_MDC_PIN, ETH_MDIO_PIN, ETH_POWER_PIN, ETH_CLK_MODE);
}


void loop()
{
  if (eth_connected) {
    testClient("google.com", 80);
  }
  delay(10000);
}

Complete list of Ethernet examples.