ADC¶
API Reference¶
Header File¶
Functions¶
-
esp_err_t
adc_read(uint16_t *data)¶ Single measurement of TOUT(ADC) pin, unit : 1/1023 V or VDD pin, uint: 1 mV.
- Note
- When measuring VDD pin voltage, the TOUT(ADC) pin must be left floating.
- Return
- ESP_OK Success
- ESP_ERR_INVALID_ARG Parameter error
- ESP_FAIL adc has not been initialized yet
- Parameters
data: Pointer to accept adc value.
-
esp_err_t
adc_read_fast(uint16_t *data, uint16_t len)¶ Measure the input voltage of TOUT(ADC) pin, unit : 1/1023 V.
- Note
- Wi-Fi and interrupts need to be turned off.
- Return
- ESP_OK Success
- ESP_ERR_INVALID_ARG Parameter error
- ESP_FAIL adc has not been initialized yet
- Parameters
data: Pointer to accept adc value. Input voltage of TOUT(ADC) pin, unit : 1/1023 Vlen: Receiving length of ADC value, range [1, 65535]
-
esp_err_t
adc_deinit()¶ Deinit the adc.
- Return
- ESP_OK Success
- ESP_FAIL adc has not been initialized yet
-
esp_err_t
adc_init(adc_config_t *config)¶ Initialize the adc.
- Note
- First modify menuconfig->Component config->PHY->vdd33_const value, vdd33_const provides ADC mode settings, i.e. selecting system voltage or external voltage measurements. When measuring system voltage, it must be set to 255. To read the external voltage on TOUT(ADC) pin, vdd33_const need less than 255 When the ADC reference voltage is set to the actual VDD33 power supply voltage, the value range of vdd33_const is [18,36], the unit is 0.1V. When the ADC reference voltage is set to the default value of 3.3V as the supply voltage, the range of vdd33_const is [0, 18] or (36, 255).
- Return
- ESP_OK Success
- ESP_ERR_NO_MEM malloc fail
- ESP_ERR_INVALID_ARG Parameter error
- ESP_FAIL adc has been initialized
- Parameters
config: Pointer to deliver initialize configuration parameter
Structures¶
-
struct
adc_config_t¶ ADC initialization parameter structure type definition.
Public Members
-
adc_mode_t
mode¶ ADC mode
-
uint8_t
clk_div¶ ADC sample collection clock=80M/clk_div, range[8, 32]
-
adc_mode_t