eFuse Manager

Introduction

The eFuse Manager library is designed to structure access to eFuse bits and make using these easy. This library operates eFuse bits by a structure name wich assigned in eFuse table. This sections introduces some concepts used by eFuse Manager.

Hardware description

The ESP32 has a number of eFuses which can store system and user parameters. Each eFuse is a one-bit field which can be programmed to 1 after which it cannot be reverted back to 0. Some of system parameters are using these eFuse bits directly by hardware modules and have special place (for example EFUSE_BLK0). For more details see ESP32 Technical Reference Manual in part 20 eFuse controller. Some eFuse bits are available for user applications.

ESP32 has 4 eFuse blocks each of the size of 256 bits (not all bits are available):

  • EFUSE_BLK0 is used entirely for system purposes;
  • EFUSE_BLK1 is used for flash encrypt key. If not using that Flash Encryption feature, they can be used for another purpose;
  • EFUSE_BLK2 is used for security boot key. If not using that Secure Boot feature, they can be used for another purpose;
  • EFUSE_BLK3 can be partially reserved for the custom MAC address, or used entirely for user application. Note that some bits are already used in IDF.

Each block is divided into 8 32-bits registers.

eFuse Manager component

The component has API functions for reading and writing fields. Access to the fields is carried out through the structures that describe the location of the eFuse bits in the blocks. The component provides the ability to form fields of any length and from any number of individual bits. The description of the fields is made in a CSV file in a table form. To generate from a tabular form (CSV file) in the C-source uses the tool efuse_table_gen.py. The tool checks the CSV file for uniqueness of field names and bit intersection, in case of using a custom file from the user’s project directory, the utility will check with the common CSV file.

CSV files:

  • common (esp_efuse_table.csv) - contains eFuse fields which are used inside the IDF. C-source generation should be done manually when changing this file (run command idf.py efuse_common_table). Note that changes in this file can lead to incorrect operation.
  • custom - (optional and can be enabled by CONFIG_EFUSE_CUSTOM_TABLE) contains eFuse fields that are used by the user in their application. C-source generation should be done manually when changing this file and running idf.py efuse_custom_table.

Description CSV file

The CSV file contains a description of the eFuse fields. In the simple case, one field has one line of description. Table header:

# field_name,  efuse_block(EFUSE_BLK0..EFUSE_BLK3), bit_start(0..255),  bit_count(1..256),              comment

Individual params in CSV file the following meanings:

field_name
Name of field. The prefix ESP_EFUSE_ will be added to the name, and this field name will be available in the code. This name will be used to access the fields. The name must be unique for all fields. If the line has an empty name, then this line is combined with the previous field. This allows you to set an arbitrary order of bits in the field, and expand the field as well (see MAC_FACTORY field in the common table).
efuse_block
Block number. It determines where the eFuse bits will be placed for this field. Available EFUSE_BLK0..EFUSE_BLK3.
bit_start
Start bit number (0..255). The bit_start field can be omitted. In this case, it will be set to bit_start + bit_count from the previous record, if it has the same efuse_block. Otherwise (if efuse_block is different, or this is the first entry), an error will be generated.
bit_count
The number of bits to use in this field (1..-). This parameter can not be omitted. This field also may be MAX_BLK_LEN in this case, the field length will have the maximum block length, taking into account the coding scheme (applicable for ESP_EFUSE_SECURE_BOOT_KEY and ESP_EFUSE_ENCRYPT_FLASH_KEY fields). The value MAX_BLK_LEN depends on CONFIG_EFUSE_MAX_BLK_LEN, will be replaced with “None” - 256, “3/4” - 192, “REPEAT” - 128.
comment
This param is using for comment field, it also move to C-header file. The comment field can be omitted.

If a non-sequential bit order is required to describe a field, then the field description in the following lines should be continued without specifying a name, this will indicate that it belongs to one field. For example two fields MAC_FACTORY and MAC_FACTORY_CRC:

# Factory MAC address #
#######################
MAC_FACTORY,            EFUSE_BLK0,    72,    8,    Factory MAC addr [0]
,                       EFUSE_BLK0,    64,    8,    Factory MAC addr [1]
,                       EFUSE_BLK0,    56,    8,    Factory MAC addr [2]
,                       EFUSE_BLK0,    48,    8,    Factory MAC addr [3]
,                       EFUSE_BLK0,    40,    8,    Factory MAC addr [4]
,                       EFUSE_BLK0,    32,    8,    Factory MAC addr [5]
MAC_FACTORY_CRC,        EFUSE_BLK0,    80,    8,    CRC8 for factory MAC address

This field will available in code as ESP_EFUSE_MAC_FACTORY and ESP_EFUSE_MAC_FACTORY_CRC.

efuse_table_gen.py tool

The tool is designed to generate C-source files from CSV file and validate fields. First of all, the check is carried out on the uniqueness of the names and overlaps of the field bits. If an additional custom file is used, it will be checked with the existing common file (esp_efuse_table.csv). In case of errors, a message will be displayed and the string that caused the error. C-source files contain structures of type esp_efuse_desc_t.

To generate a common files, use the following command idf.py efuse_common_table or:

cd $IDF_PATH/components/efuse/
./efuse_table_gen.py esp32/esp_efuse_table.csv

After generation in the folder esp32 create:

  • esp_efuse_table.c file.
  • In include folder esp_efuse_table.c file.

To generate a custom files, use the following command idf.py efuse_custom_table or:

cd $IDF_PATH/components/efuse/
./efuse_table_gen.py esp32/esp_efuse_table.csv PROJECT_PATH/main/esp_efuse_custom_table.csv

After generation in the folder PROJECT_PATH/main create:

  • esp_efuse_custom_table.c file.
  • In include folder esp_efuse_custom_table.c file.

To use the generated fields, you need to include two files:

#include "esp_efuse.h"
#include "esp_efuse_table.h" or "esp_efuse_custom_table.h"

Support coding scheme

eFuse have three coding schemes:

  • None (value 0).
  • 3/4 (value 1).
  • Repeat (value 2).

The coding scheme affects only EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3 blocks. EUSE_BLK0 block always has a coding scheme None. Coding changes the number of bits that can be written into a block, the block length is constant 256, some of these bits are used for encoding and are not used.

When using a coding scheme, the length of the payload that can be written is limited (for more details 20.3.1.3 System Parameter coding_scheme):

  • None 256 bits.
  • 3/4 192 bits.
  • Repeat 128 bits.

You can find out the coding scheme of your chip:

  • run a espefuse.py -p COM4 summary command.
  • from esptool utility logs (during flashing).
  • calling the function in the code esp_efuse_get_coding_scheme() for the EFUSE_BLK3 block.

eFuse tables must always comply with the coding scheme in the chip. There is an EFUSE_CODE_SCHEME_SELECTOR option to select the coding type for tables in a Kconfig. When generating source files, if your tables do not follow the coding scheme, an error message will be displayed. Adjust the length or offset fields. If your program was compiled with None encoding and 3/4 is used in the chip, then the ESP_ERR_CODING error may occur when calling the eFuse API (the field is outside the block boundaries). If the field matches the new block boundaries, then the API will work without errors.

Also, 3/4 coding scheme imposes restrictions on writing bits belonging to one coding unit. The whole block with a length of 256 bits is divided into 4 coding units, and in each coding unit there are 6 bytes of useful data and 2 service bytes. These 2 service bytes contain the checksum of the previous 6 data bytes.

It turns out that only one field can be written into one coding unit. Repeated rewriting in one coding unit is prohibited. But if the record was made in advance or through a esp_efuse_write_block() function, then reading the fields belonging to one coding unit is possible.

After changing the coding scheme, run efuse_common_table and efuse_custom_table commands to check the tables of the new coding scheme.

eFuse API

Access to the fields is via a pointer to the description structure. API functions have some basic operation:

For frequently used fields, special functions are made, like this esp_efuse_get_chip_ver(), esp_efuse_get_pkg_ver().

How add a new field

  1. Find a free bits for field. Show esp_efuse_table.csv file or run idf.py show_efuse_table or the next command:
$ ./efuse_table_gen.py esp32/esp_efuse_table.csv --info
eFuse coding scheme: NONE
#       field_name                      efuse_block     bit_start       bit_count
1       WR_DIS_FLASH_CRYPT_CNT          EFUSE_BLK0         2               1
2       WR_DIS_BLK1                     EFUSE_BLK0         7               1
3       WR_DIS_BLK2                     EFUSE_BLK0         8               1
4       WR_DIS_BLK3                     EFUSE_BLK0         9               1
5       RD_DIS_BLK1                     EFUSE_BLK0         16              1
6       RD_DIS_BLK2                     EFUSE_BLK0         17              1
7       RD_DIS_BLK3                     EFUSE_BLK0         18              1
8       FLASH_CRYPT_CNT                 EFUSE_BLK0         20              7
9       MAC_FACTORY                     EFUSE_BLK0         32              8
10      MAC_FACTORY                     EFUSE_BLK0         40              8
11      MAC_FACTORY                     EFUSE_BLK0         48              8
12      MAC_FACTORY                     EFUSE_BLK0         56              8
13      MAC_FACTORY                     EFUSE_BLK0         64              8
14      MAC_FACTORY                     EFUSE_BLK0         72              8
15      MAC_FACTORY_CRC                 EFUSE_BLK0         80              8
16      CHIP_VER_DIS_APP_CPU            EFUSE_BLK0         96              1
17      CHIP_VER_DIS_BT                 EFUSE_BLK0         97              1
18      CHIP_VER_PKG                    EFUSE_BLK0        105              3
19      CHIP_CPU_FREQ_LOW               EFUSE_BLK0        108              1
20      CHIP_CPU_FREQ_RATED             EFUSE_BLK0        109              1
21      CHIP_VER_REV1                   EFUSE_BLK0        111              1
22      ADC_VREF_AND_SDIO_DREF          EFUSE_BLK0        136              6
23      XPD_SDIO_REG                    EFUSE_BLK0        142              1
24      SDIO_TIEH                       EFUSE_BLK0        143              1
25      SDIO_FORCE                      EFUSE_BLK0        144              1
26      ENCRYPT_CONFIG                  EFUSE_BLK0        188              4
27      CONSOLE_DEBUG_DISABLE           EFUSE_BLK0        194              1
28      ABS_DONE_0                      EFUSE_BLK0        196              1
29      DISABLE_JTAG                    EFUSE_BLK0        198              1
30      DISABLE_DL_ENCRYPT              EFUSE_BLK0        199              1
31      DISABLE_DL_DECRYPT              EFUSE_BLK0        200              1
32      DISABLE_DL_CACHE                EFUSE_BLK0        201              1
33      ENCRYPT_FLASH_KEY               EFUSE_BLK1         0              256
34      SECURE_BOOT_KEY                 EFUSE_BLK2         0              256
35      MAC_CUSTOM_CRC                  EFUSE_BLK3         0               8
36      MAC_CUSTOM                      EFUSE_BLK3         8               48
37      ADC1_TP_LOW                     EFUSE_BLK3         96              7
38      ADC1_TP_HIGH                    EFUSE_BLK3        103              9
39      ADC2_TP_LOW                     EFUSE_BLK3        112              7
40      ADC2_TP_HIGH                    EFUSE_BLK3        119              9
41      SECURE_VERSION                  EFUSE_BLK3        128              32
42      MAC_CUSTOM_VER                  EFUSE_BLK3        184              8

Used bits in eFuse table:
EFUSE_BLK0
[2 2] [7 9] [16 18] [20 27] [32 87] [96 97] [105 109] [111 111] [136 144] [188 191] [194 194] [196 196] [198 201]

EFUSE_BLK1
[0 255]

EFUSE_BLK2
[0 255]

EFUSE_BLK3
[0 55] [96 159] [184 191]

Note: Not printed ranges are free for using. (bits in EFUSE_BLK0 are reserved for Espressif)

Parsing eFuse CSV input file $IDF_PATH/components/efuse/esp32/esp_efuse_table.csv ...
Verifying eFuse table...

The number of bits not included in square brackets is free (bits in EFUSE_BLK0 are reserved for Espressif). All fields are checked for overlapping.

  1. Fill a line for field: field_name, efuse_block, bit_start, bit_count, comment.
  2. Run a show_efuse_table command to check eFuse table. To generate source files run efuse_common_table or efuse_custom_table command.

Debug eFuse & Unit tests

Virtual eFuses

The Kconfig option CONFIG_EFUSE_VIRTUAL will virtualize eFuse values inside the eFuse Manager, so writes are emulated and no eFuse values are permanently changed. This can be useful for debugging app and unit tests.

espefuse.py

esptool includes a useful tool for reading/writing ESP32 eFuse bits - espefuse.py.

espefuse.py -p COM4 summary

espefuse.py v2.3.1
Connecting........_
Security fuses:
FLASH_CRYPT_CNT        Flash encryption mode counter                     = 0 R/W (0x0)
FLASH_CRYPT_CONFIG     Flash encryption config (key tweak bits)          = 0 R/W (0x0)
CONSOLE_DEBUG_DISABLE  Disable ROM BASIC interpreter fallback            = 1 R/W (0x1)
ABS_DONE_0             secure boot enabled for bootloader                = 0 R/W (0x0)
ABS_DONE_1             secure boot abstract 1 locked                     = 0 R/W (0x0)
JTAG_DISABLE           Disable JTAG                                      = 0 R/W (0x0)
DISABLE_DL_ENCRYPT     Disable flash encryption in UART bootloader       = 0 R/W (0x0)
DISABLE_DL_DECRYPT     Disable flash decryption in UART bootloader       = 0 R/W (0x0)
DISABLE_DL_CACHE       Disable flash cache in UART bootloader            = 0 R/W (0x0)
BLK1                   Flash encryption key
  = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLK2                   Secure boot key
  = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
BLK3                   Variable Block 3
  = 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa 87 02 91 00 00 00 00 00 00 00 00 00 00 00 00 R/W

Efuse fuses:
WR_DIS                 Efuse write disable mask                          = 0 R/W (0x0)
RD_DIS                 Efuse read disablemask                            = 0 R/W (0x0)
CODING_SCHEME          Efuse variable block length scheme                = 1 R/W (0x1) (3/4)
KEY_STATUS             Usage of efuse block 3 (reserved)                 = 0 R/W (0x0)

Config fuses:
XPD_SDIO_FORCE         Ignore MTDI pin (GPIO12) for VDD_SDIO on reset    = 0 R/W (0x0)
XPD_SDIO_REG           If XPD_SDIO_FORCE, enable VDD_SDIO reg on reset   = 0 R/W (0x0)
XPD_SDIO_TIEH          If XPD_SDIO_FORCE & XPD_SDIO_REG, 1=3.3V 0=1.8V   = 0 R/W (0x0)
SPI_PAD_CONFIG_CLK     Override SD_CLK pad (GPIO6/SPICLK)                = 0 R/W (0x0)
SPI_PAD_CONFIG_Q       Override SD_DATA_0 pad (GPIO7/SPIQ)               = 0 R/W (0x0)
SPI_PAD_CONFIG_D       Override SD_DATA_1 pad (GPIO8/SPID)               = 0 R/W (0x0)
SPI_PAD_CONFIG_HD      Override SD_DATA_2 pad (GPIO9/SPIHD)              = 0 R/W (0x0)
SPI_PAD_CONFIG_CS0     Override SD_CMD pad (GPIO11/SPICS0)               = 0 R/W (0x0)
DISABLE_SDIO_HOST      Disable SDIO host                                 = 0 R/W (0x0)

Identity fuses:
MAC                    MAC Address
  = 84:0d:8e:18:8e:44 (CRC ad OK) R/W
CHIP_VER_REV1          Silicon Revision 1                                = 1 R/W (0x1)
CHIP_VERSION           Reserved for future chip versions                 = 2 R/W (0x2)
CHIP_PACKAGE           Chip package identifier                           = 0 R/W (0x0)

Calibration fuses:
BLK3_PART_RESERVE      BLOCK3 partially served for ADC calibration data  = 1 R/W (0x1)
ADC_VREF               Voltage reference calibration                     = 1114 R/W (0x2)
ADC1_TP_LOW            ADC1 150mV reading                                = 346 R/W (0x11)
ADC1_TP_HIGH           ADC1 850mV reading                                = 3285 R/W (0x5)
ADC2_TP_LOW            ADC2 150mV reading                                = 449 R/W (0x7)
ADC2_TP_HIGH           ADC2 850mV reading                                = 3362 R/W (0x1f5)

Flash voltage (VDD_SDIO) determined by GPIO12 on reset (High for 1.8V, Low/NC for 3.3V).

To get a dump for all eFuse registers.

espefuse.py -p COM4 dump

$ espefuse.py -p COM4 dump
espefuse.py v2.3.1
Connecting........__
EFUSE block 0:
00000000 c403bb68 0082240a 00000000 00000035 00000000 00000000
EFUSE block 1:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
EFUSE block 2:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
EFUSE block 3:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

Functions

esp_err_t esp_efuse_read_field_blob(const esp_efuse_desc_t *field[], void *dst, size_t dst_size_bits)

Reads bits from EFUSE field and writes it into an array.

The number of read bits will be limited to the minimum value from the description of the bits in “field” structure or “dst_size_bits” required size. Use “esp_efuse_get_field_size()” function to determine the length of the field.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
Parameters
  • field: A pointer to the structure describing the fields of efuse.
  • dst: A pointer to array that will contain the result of reading.
  • dst_size_bits: The number of bits required to read. If the requested number of bits is greater than the field, the number will be limited to the field size.

esp_err_t esp_efuse_read_field_cnt(const esp_efuse_desc_t *field[], size_t *out_cnt)

Reads bits from EFUSE field and returns number of bits programmed as “1”.

If the bits are set not sequentially, they will still be counted.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
Parameters
  • field: A pointer to the structure describing the fields of efuse.
  • out_cnt: A pointer that will contain the number of programmed as “1” bits.

esp_err_t esp_efuse_write_field_blob(const esp_efuse_desc_t *field[], const void *src, size_t src_size_bits)

Writes array to EFUSE field.

The number of write bits will be limited to the minimum value from the description of the bits in “field” structure or “src_size_bits” required size. Use “esp_efuse_get_field_size()” function to determine the length of the field. After the function is completed, the writing registers are cleared.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
  • ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
  • ESP_ERR_CODING: Error range of data does not match the coding scheme.
Parameters
  • field: A pointer to the structure describing the fields of efuse.
  • src: A pointer to array that contains the data for writing.
  • src_size_bits: The number of bits required to write.

esp_err_t esp_efuse_write_field_cnt(const esp_efuse_desc_t *field[], size_t cnt)

Writes a required count of bits as “1” to EFUSE field.

If there are no free bits in the field to set the required number of bits to “1”, ESP_ERR_EFUSE_CNT_IS_FULL error is returned, the field will not be partially recorded. After the function is completed, the writing registers are cleared.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
  • ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
Parameters
  • field: A pointer to the structure describing the fields of efuse.
  • cnt: Required number of programmed as “1” bits.

esp_err_t esp_efuse_set_write_protect(esp_efuse_block_t blk)

Sets a write protection for the whole block.

After that, it is impossible to write to this block. The write protection does not apply to block 0.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
  • ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
  • ESP_ERR_NOT_SUPPORTED: The block does not support this command.
Parameters
  • blk: Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3)

esp_err_t esp_efuse_set_read_protect(esp_efuse_block_t blk)

Sets a read protection for the whole block.

After that, it is impossible to read from this block. The read protection does not apply to block 0.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
  • ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
  • ESP_ERR_NOT_SUPPORTED: The block does not support this command.
Parameters
  • blk: Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3)

int esp_efuse_get_field_size(const esp_efuse_desc_t *field[])

Returns the number of bits used by field.

Return
Returns the number of bits used by field.
Parameters
  • field: A pointer to the structure describing the fields of efuse.

uint32_t esp_efuse_read_reg(esp_efuse_block_t blk, unsigned int num_reg)

Returns value of efuse register.

This is a thread-safe implementation. Example: EFUSE_BLK2_RDATA3_REG where (blk=2, num_reg=3)

Return
Value of register
Parameters
  • blk: Block number of eFuse.
  • num_reg: The register number in the block.

esp_err_t esp_efuse_write_reg(esp_efuse_block_t blk, unsigned int num_reg, uint32_t val)

Write value to efuse register.

Apply a coding scheme if necessary. This is a thread-safe implementation. Example: EFUSE_BLK3_WDATA0_REG where (blk=3, num_reg=0)

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
Parameters
  • blk: Block number of eFuse.
  • num_reg: The register number in the block.
  • val: Value to write.

esp_efuse_coding_scheme_t esp_efuse_get_coding_scheme(esp_efuse_block_t blk)

Return efuse coding scheme for blocks.

Note: The coding scheme is applicable only to 1, 2 and 3 blocks. For 0 block, the coding scheme is always NONE.

Return
Return efuse coding scheme for blocks
Parameters
  • blk: Block number of eFuse.

esp_err_t esp_efuse_read_block(esp_efuse_block_t blk, void *dst_key, size_t offset_in_bits, size_t size_bits)

Read key to efuse block starting at the offset and the required size.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
  • ESP_ERR_CODING: Error range of data does not match the coding scheme.
Parameters
  • blk: Block number of eFuse.
  • dst_key: A pointer to array that will contain the result of reading.
  • offset_in_bits: Start bit in block.
  • size_bits: The number of bits required to read.

esp_err_t esp_efuse_write_block(esp_efuse_block_t blk, const void *src_key, size_t offset_in_bits, size_t size_bits)

Write key to efuse block starting at the offset and the required size.

Return
  • ESP_OK: The operation was successfully completed.
  • ESP_ERR_INVALID_ARG: Error in the passed arguments.
  • ESP_ERR_CODING: Error range of data does not match the coding scheme.
  • ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits
Parameters
  • blk: Block number of eFuse.
  • src_key: A pointer to array that contains the key for writing.
  • offset_in_bits: Start bit in block.
  • size_bits: The number of bits required to write.

uint8_t esp_efuse_get_chip_ver(void)

Returns chip version from efuse.

Return
chip version

uint32_t esp_efuse_get_pkg_ver(void)

Returns chip package from efuse.

Return
chip package

void esp_efuse_burn_new_values(void)
void esp_efuse_reset(void)
void esp_efuse_disable_basic_rom_console(void)
esp_err_t esp_efuse_apply_34_encoding(const uint8_t *in_bytes, uint32_t *out_words, size_t in_bytes_len)
void esp_efuse_write_random_key(uint32_t blk_wdata0_reg)
uint32_t esp_efuse_read_secure_version()
bool esp_efuse_check_secure_version(uint32_t secure_version)
esp_err_t esp_efuse_update_secure_version(uint32_t secure_version)
void esp_efuse_init(uint32_t offset, uint32_t size)

Structures

struct esp_efuse_desc_t

Structure eFuse field.

Public Members

esp_efuse_block_t efuse_block

Block of eFuse

uint8_t bit_start

Start bit [0..255]

uint16_t bit_count

Length of bit field [1..-]

Macros

ESP_ERR_EFUSE

Base error code for efuse api.

ESP_OK_EFUSE_CNT

OK the required number of bits is set.

ESP_ERR_EFUSE_CNT_IS_FULL

Error field is full.

ESP_ERR_EFUSE_REPEATED_PROG

Error repeated programming of programmed bits is strictly forbidden.

ESP_ERR_CODING

Error while a encoding operation.

Enumerations

enum esp_efuse_block_t

Type of eFuse blocks.

Values:

EFUSE_BLK0 = 0

Number of eFuse block. Reserved.

EFUSE_BLK1 = 1

Number of eFuse block. Used for Flash Encryption. If not using that Flash Encryption feature, they can be used for another purpose.

EFUSE_BLK2 = 2

Number of eFuse block. Used for Secure Boot. If not using that Secure Boot feature, they can be used for another purpose.

EFUSE_BLK3 = 3

Number of eFuse block. Uses for the purpose of the user.

enum esp_efuse_coding_scheme_t

Type of coding scheme.

Values:

EFUSE_CODING_SCHEME_NONE = 0

None

EFUSE_CODING_SCHEME_3_4 = 1

3/4 coding

EFUSE_CODING_SCHEME_REPEAT = 2

Repeat coding