Signaling Test AT Commands

• AT+FACTPLCP - Send with long or short PLCP(physical layer convergence procedure)

AT+FACTPLCP-Send with long or short PLCP(physical layer convergence procedure)

Set Command:

AT+FACTPLCP=<enable>,<tx_with_long>

Response:

OK

Parameters:

• <enable> : Enable or disable manual configuration
  • 0 : Disable manual configuration, it will use the defalut configuration
  • 1 : Enable manual configuration, send PLCP as tx_with_long
• <tx_with_long> : Send with long PLCP or not
  • 0 : Send with short PLCP
  • 1 : Send with long PLCP